Contamination Control Tools, devices, equipment, jigs and any other objects which will come in contact with SIFEL should be well cleaned. No moisture, oil, dirt, dust or debris is allowed. When SIFEL products contact materials such as sulfur, phosphorus, nitrogen or amine-containing compounds or organometallic salts, curing reaction may be inhibited. Avoid any possibility of contamination. Strorage Seal containers tightly and keep in a cool, dark place. Exposure to heat, sunlight, moisture or chemicals may be cause quality changes. Some one-component types are required to be stored in a refrigerator or freezer with the appropriate temperature conditions. For Your Safety Keep containers tightly closed when not in use. Harmful gases may be generated when the product is heated at high temperature. Use only where an adequate ventilation system is available to exhaust vapor. Do not inhale evolved vapor. Do not contact with acidic, basic, or oxidizing materials. To avoid eye and skin contact, use with safety glasses and safety gloves. Do not swallow. Do not smoke cigarettes which have come into contact with the product. Wash thoroughly after handling. Keep out of reach of children. For more information, refer to the relevant MSDS.       The data and information presented in this catalog may not be relied upon to represent standard values. Shin-Etsu reserves the right to change such data and information, in whole or in part, in this catalog, including product performance standards and specifications without notice. Users are solely responsible for making preliminary tests to determine the suitability of products for their intended use. Statements concerning possible or suggested uses made herein may not be relied upon, or be construed, as a guaranty of no patent infringement. The SIFEL products described herein have been designed, manufactured and developed solely for general industrial use only; such SIFEL products are not designed for, intended for use as, or suitable for, medical, surgical, food or other particular purposes. Users have the sole responsibility and obligation to determine the suitability of the SIFEL products described herein for any application, to make preliminary tests, and to confirm the safety of such products for their use. Users must never use the SIFEL products described herein for the purpose of implantation into the human body and/or injection into humans. Users are solely responsible for exporting or importing the SIFEL products described herein, and complying with all applicable laws, regulations, and rules relating to the use of such products. Shin-Etsu recommends checking each pertinent country's laws, regulations, and rules in advance, when exporting or importing, and before using, the products.